Reliable Supplier Outdoor Solar Light - 160w solar led street light Turbine Wind Solar Hybrid Street Light – Xintong

Parameters

Wind turbine module

►Starts non loaded: Minimum speed is 2m/s to start the wind turbine.
►Electronic braking system: Braking system will turn on automatically when wind speed ≥ 35m/s.
►Discharging while charging: At night, the wind turbine workes to support the LED lighting and also charge the battery. Read the data:
► Read the data of wind turbine in real-time by smartphone APP

PV generation module

►Daytime and nighttime will be recognized according to the output voltage of solar panel. When nightfall, the
►LED lighting operates; when daytime, charge the battery.
►With MPPT technology, the battery will be charged max by the sunlight.
►Read the data: Read the data of PV module in real-time by smartphone APP.

LED lighting module

►Utilize ligh effiency LED, with integrated optical lens.
►PWM adjustment, constant current output.
►PIR motion sensor: enter energy-saving mode when nobody to prolong backup days.
►With RED pathway indicator, for warning effect and decoration at night. (Can ajust the brightness and time of switch-on/off by smartphone APP)

Battery energy storage system

The storage of lithium battery pack can be customized:
►Inside there is a cell baffle to protect the battery, NTC temperature sensor and heater band.
►Real-time detection of the voltage and currency to avoid the overcharging, overdischarging and overcurrent.
►Real-time detection of battery temperature to start the battery heating when extremely low
temperature, and stop heating when up to 10 degrees. (Also can monitor the battery data by smartphone APP)

Bluetooth communication module

Support troubleshooting, read light data and control the light switch on/off by smartphone bluetooth APP.

Installation Manual

Please don’t install when gale weather; Please keep the blade rotating area 100% safe;

Please keep the solar panel can 100% got sunlight. Installation steps are as below:

1.Let the blade cover with “Number Mark” face down, and fix it on flade plate with screws

2.Put the fairing cap on the blade plate and fix it with screws

3.Remember to insert the copper tube before assembling the tail

4.Insert the wind turbine cables into the connecting socket

5.Wrap the top of the socket with non-slip mat, and insert into the wind turbine

6.Take the wind turbine cables out through the round hole

7.Fasten the three longest screws on the connecting socket

8.Insert the light pole into the connecting socket and fix it with screws

9.Fix the light on the socket by screws and insert the wind turbine cables into bracket

10.Open the window plate, connect the cables and connector

11.Put the connected parts in and lock up the window plate

12.Check all the screws fasten, and make the light pole upright, installation finish

Application

Especially for high latitude area, alpine region and area lack of sunlight but with rich wind energy.

FAQ

1..What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times
become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with
your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

2.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

3. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact
us for further information.